Here is a nice site on CRTs: http://www.crtsite.com/page3.html
This is a nice little machine. It takes Quarters and Dollar Bills. Can be set to free play. This game has been sold.
There is now a NFL Blitz ’99 and an original Donkey Kong in the house. These machines are not in Bones Arcade, but on the north side of the same building complex. As always, Rex still has a $50 bounty on beating his high score on Joker Poker of 440,000.
The Blitz is for sale for $800. The DK is not mine to sell and Rex would kill me if I sold the Joker Poker.
Should end up with a working NFL Blitz ’99, Pac-Man, Pole Position (I or II), Capcom Bowling, centipede cocktail and a couple of project cabinets. Lots of coin doors and a few control panels. More info to come…
Sadly, this cocktail is being parted out. The MPU is missing and the replacement is cost prohibitive. These are just a few photos I wanted archived for future reference.
And this is a picture of the board that is missing:
I just got this in. It needs an MPU PCB50210125H and the apron plexi is broken. The MPU board is missing but otherwise it seems complete.
This is the best web page I have found on it:
Need some play.
Multiple broken wire and switches. Bad GI connectors and failed Optos on the drop targets.
This is just a little reminder so I can find the part numbers easily when I need them thanks to:
Trifurcon Connector Pins.
Molex makes a crimp-on .156″ size female terminal pin called a “trifurcon” pin (not available in the .100″ pin size). This style .156″ pin differs than the “normal” pin; the metal material is more heat resistant, and it has three wiper contacts instead of just one. The more contact points means the female pin “hugs” the male header pin with greater surface area. I highly recommend these. They are available from Digikey (800-344-4539 or http://www.digikey.com). You can also view the specs for these pins at http://www.molex.com/product/pcb/6838.html. Compares these to the “normal” connector pin specs at http://www.molex.com/product/pcb/2478.html.
Note Molex sells these pins in “strips” or on a “reel”. Do NOT buy connector pins this way! Always buy them in “bags” (separated). It’s just too difficult to cut them when they are in strips. If you don’t do a good job cutting them, they won’t insert into their plastic housing correctly. Also always get the tin plated version, NOT the gold plated pins.
.156″ Trifurcon pins (three wipers): Digikey part# WM2313-ND (Molex part# 08-52-0113, for 18 to 24 gauge wire). Price is $1.02 for 10, $8.50 for 100.
.156″ tin pins (one wiper): Hosfelt (800-524-6464) part# 08-50-0106, for 18 to 24 gauge wire). Price is $0.06 each.
Board Mounted Header Pins.
These are available in several styles. Get the most number of pins available, and cut the header to the size you need. They also come with a “lock” and without a lock. The lock variety is what you’ll use the most.
.156″ header pins with lock (12 pins): Hosfelt (800-524-6464) part# 26-48-1125, $0.94 each.
.156″ header pins with no lock (12 pins): Hosfelt (800-524-6464) part# 26-48-1121, $0.70 each.
Sometimes you’ll have to replace the plastic connector housing too if it is burnt, in addition to the pins within the housing. Get the most number of pins available, and cut the connector to the size you need.
.156″ white housings (12 pins): Hosfelt (800-524-6464) part# 09-50-3121, $0.79 each.
.156″ black hi-temp housing: Williams part #5792-13384-xx. The “xx” is the number of pins for the housing from “02” to “18”.
A polarized peg is a small nylon plug that go into the connector housing so the housing is “keyed” (you can’t plug it into the wrong board header pin connector). I highly recommend using these if you replace a connector housing.
.156″ polarized peg: Hosfelt (800-524-6464) part# 15-04-0220, $0.13 each.